# Math of Neural Networks — from scratch in Python

Math of Neural Networks — from scratch in PythonOmar AflakBlockedUnblockFollowFollowingNov 14, 2018Make your own machine learning library.

Photo by Mathew Schwartz on UnsplashIn this post we will go through the math of machine learning and code from scratch, in Python, a small library to build neural networks with a variety of layers (Fully Connected, Convolutional, etc.

).

Eventually, we will be able to write something like :3-layer neural networkI’m assuming you already have some knowledge about neural networks.

The purpose here is not to explain why we make these models, but to show how to make a proper implementation.

Layer by LayerWe need to keep in mind the big picture here :We feed input data into the neural network.

The data flows from layer to layer until we have the output.

Once we have the output, we can calculate the error which is a scalar.

Finally we can adjust a given parameter (weight or bias) by subtracting the derivative of the error with respect to the parameter itself.

We iterate through that process.

The most important step is the 4th.

We want to be able to have as many layers as we want, and of any type.

But if we modify/add/remove one layer from the network, the output of the network is going to change, which is going to change the error, which is going to change the derivative of the error with respect to the parameters.

We need to be able to compute the derivatives regardless of the network architecture, regardless of the activation functions, regardless of the loss we use.

In order to achieve that, we must implement each layer separately.

What every layer should implementEvery layer that we might create (fully connected, convolutional, maxpooling, dropout, etc.

) have at least 2 things in common : input and output data.

Forward propagationWe can already emphasize one important point which is : the output of one layer is the input of the next one.

This is called forward propagation.

Essentially, we give the input data to the first layer, then the output of every layer becomes the input of the next layer until we reach the end of the network.

By comparing the result of the network (Y) with the desired output (let’s say Y*), we can calculate en error E.

The goal is to minimize that error by changing the parameters in the network.

That is backward propagation (backpropagation).

Basically, we want to change some parameter in the network (call it w) so that the total error E decreases.

There is a clever way to do it (not randomly) which is the following :Where α is a parameter in the range [0,1] that we set and that is called the learning rate.

Anyway, the important thing here is ∂E/∂w (the derivative of E with respect to w).

We need to be able to find the value of that expression for any parameter of the network regardless of its architecture.

Backward propagationSuppose that we give a layer the derivative of the error with respect to its output (∂E/∂Y), then it must be able to provide the derivative of the error with respect to its input (∂E/∂X).

Remember that E is a scalar (a number) and X and Y are matrices.

Let’s forget about ∂E/∂X for now.

The trick here, is that if we have access to ∂E/∂Y we can very easily calculate ∂E/∂W (if the layer has any trainable parameters) without knowing anything about the network architecture !.We simply use the chain rule :The unknown is ∂y_j/∂w which totally depends on how the layer is computing its output.

So if every layer have access to ∂E/∂Y, where Y is its own output, then we can update our parameters !But why ∂E/∂X ?Don’t forget, the output of one layer is the input of the next layer.

Which means ∂E/∂X for one layer is ∂E/∂Y for the previous layer !.That’s it !.It’s just a clever way to propagate the error !.Again, we can use the chain rule :This is very important, it’s the key to understand backpropagation !.After that, we’ll be able to code a Deep Convolutional Neural Network from scratch in no time !Diagram to understand backpropagationThis is what I described earlier.

Layer 3 is going to update its parameters using ∂E/∂Y, and is then going to pass ∂E/∂H2 to the previous layer, which is its own “∂E/∂Y”.

Layer 2 is then going to do the same, and so on and so forth.

This may seem abstract here, but it will get very clear when we will apply this to a specific type of layer.

Speaking of abstract, now is a good time to write our first python class.

Abstract Base Class : LayerThe abstract class Layer, which all other layers will inherit from, handles simple properties which are an input, an output, and both a forward and backward methods.

3-layer neural networkAs you can see there is an extra parameter in backward_propagation that I didn’t mention, it is the learning_rate.

This parameter should be something like an update policy, or an optimizer as they call it in Keras, but for the sake of simplicity we’re simply going to pass a learning rate and update our parameters using gradient descent.

Fully Connected LayerNow lets define and implement the first type of layer : fully connected layer or FC layer.

FC layers are the most basic layers as every input neurons are connected to every output neurons.

Forward PropagationThe value of each output neuron can be calculated as the following :With matrices, we can compute this formula for every output neuron in one shot using a dot product :We’re done with the forward pass.

Now let’s do the backward pass of the FC layer.

Note that I’m not using any activation function yet, that’s because we will implement it in a separate layer !Backward PropagationAs we said, suppose we have a matrix containing the derivative of the error with respect to that layer’s output (∂E/∂Y).

We need :The derivative of the error with respect to the parameters (∂E/∂W, ∂E/∂B)The derivative of the error with respect to the input (∂E/∂X)Lets calculate ∂E/∂W.

This matrix should be the same size as W itself : ixj where i is the number of input neurons and j the number of output neurons.

We need one gradient for every weight :Using the chain rule stated earlier, we can write :Therefore,That’s it we have the first formula to update the weights !.Now lets calculate ∂E/∂B.

Again ∂E/∂B needs to be of the same size as B itself, one gradient per bias.

We can use the chain rule again :And conclude that,Now that we have ∂E/∂W and ∂E/∂B, we are left with ∂E/∂X which is very important as it will “act” as ∂E/∂Y for the layer before that one.

Again, using the chain rule,Finally, we can write the whole matrix :That’s it !.We have the three formulas we needed for the FC layer !Coding the Fully Connected LayerWe can now write some python code to bring this math to life !Activation LayerAll the calculation we did until now were completely linear.

Its hopeless to learn anything with that kind of model.

We need to add non-linearity to the model by applying non linear functions to the output of some layers.

Now we need to redo the whole process for this new type of layer !No worries, it’s going to be way faster as there are no learnable parameters.

We just need to calculate ∂E/∂X.

We will call f and f' the activation function and its derivative respectively.

Forward PropagationAs you will see, it is quite straightforward.

For a given input X , the output is simply the activation function applied to every element of X .

Which means input and output have the same dimensions.

Backward PropagationGiven ∂E/∂Y, we want to calculate ∂E/∂X.

Be careful, here we are using an element-wise multiplication between the two matrices (whereas in the formulas above, it was a dot product).

Coding the Activation LayerThe code for the activation layer is as straightforward.

You can also write some activation functions and their derivatives in a separate file.

These will be used later to create an ActivationLayer.

Loss FunctionUntil now, for a given layer, we supposed that ∂E/∂Y was given (by the next layer).

But what happens to the last layer ?.How does it get ∂E/∂Y ?.We simply give it manually, and it depends on how we define the error.

The error of the network, which measures how good or bad the network did for a given input data, is defined by you.

There are many ways to define the error, and one of the most known is called MSE — Mean Squared Error.

Mean Squared ErrorWhere y* and y denotes desired output and actual output respectively.

You can think of the loss as a last layer which takes all the output neurons and squashes them into one single neuron.

What we need now, as for every other layer, is to define ∂E/∂Y.

Except now, we finally reached E !These are simply two python functions that you can put in a separate file.

They will be used when creating the network.

Network ClassAlmost done !.We are going to make a Network class to create neural networks very easily akin the first picture !I commented almost every part of the code, it shouldn’t be too complicated to understand if you grasped the previous steps.

Nevertheless, leave a comment if you have any question, I will gladly answer !Building a Neural NetworkFinally !.We can use our class to create a neural network with as many layers as we want !. More details